Trying to figure out how to build a staircase? Check out this project where I walk you through the whole process of building a new set of stairs at my house!
I recently tackled a project that has been on my to do list for a while. I needed to tear down and rebuild a two story staircase at my house. While the staircase was still standing, it was in rough shape and is becoming dangerous. Whoever built it didn’t use treated material and my boot has gone through more than one tread.
While I did replace the worst of them, the stringers are also so rotten that a screw breaks it apart more instead of holding. It was also put together with non ring shank nails which are backing themselves out now. With all the problems, it’s easiest if I just knock it down and start over. I’ve now built lets see….1, 2, 3….sets of stairs. So lets go ahead and put number 4 on the books!
Check out the video above to see the whole process!
Things I Used in This How To Build A Staircase Project:
- ISOtunes Ear Protection
- Fence Armor
- Simpson Strong Tie
- Stain and Seal
- Post Saver Sleeve
- Triton Circular Saw
- Clamps
- Palm Nailer
- Simpson Joist Hangers
- Simpson Stringer Hangers
- Triton Jigsaw
- Fence Armor Post Protectors
Check Out My Other DIY Stairs Project Videos Here:
Informational YouTube video on laying out stair stringers.
If you haven’t already, don’t forget to sign up at the top of this page for my newsletter so you don’t miss new projects!
(Most of the links listed above are affiliate links. As an Amazon Associate I earn from qualifying purchases. Thank you for supporting me in this way.)